1. ALVÖRA ATF Dex VI
Low-Viscosity Automatic Transmission Fluid
Overview
ALVÖRA ATF Dex VI is a synthetic, low-viscosity automatic transmission fluid engineered for modern multi-speed automatic transmissions. It reduces internal fluid drag to improve fuel efficiency while maintaining consistent shift smoothness and high-temperature oxidation stability.
Key Benefits
- Enhanced Fuel Economy: Low-viscosity profile reduces pumping losses and parasitic drag.
- Extended Drain Intervals: Superior oxidation and shear stability prevent fluid breakdown over long service cycles.
- Smooth Shift Control: Precision friction durability eliminates clutch shudder in modern electronic transmissions.
Applications
Modern 6-speed and higher automatic transmissions requiring DEXRON® VI, MERCON® LV, or JWS 3324 specifications (backward compatible with DEXRON® III and II). (Not for CVT or DCT).
| Parameter | Test Method | Units | Typical Value |
| Appearance / Color | Visual | — | Clear Red |
| Density @ 15°C | ASTM D4052 | g/cm³ | 0.847 |
| Kinematic Viscosity @ 40°C | ASTM D445 | mm²/s (cSt) | 29.0 |
| Kinematic Viscosity @ 100°C | ASTM D445 | mm²/s (cSt) | 5.9 |
| Viscosity Index (VI) | ASTM D2270 | — | 155 |
| Brookfield Viscosity @ -40°C | ASTM D2983 | mPa·s (cP) | 10,300 |
| Flash Point (COC) | ASTM D92 | °C | 218 |
| Pour Point | ASTM D97 | °C | -51 |
Available Packaging: 1L, 4L, 5L, 20L Pail, 208L Drum, 1000L IBC
2. ALVÖRA ATF Dex IV
Heavy-Duty Automatic Transmission Fluid
Overview
ALVÖRA ATF Dex IV is a high-performance automatic transmission fluid formulated for passenger cars, commercial trucks, and heavy-duty equipment operating under high-load and high-temperature conditions.
Key Benefits
- High Thermal Stability: Resists varnish and sludge formation during heavy hauling and stop-and-go operation.
- Reliable Anti-Wear Protection: Protects planetary gears, bearings, and hydraulic valves under severe pressure.
- Shudder-Free Shifting: Stabilizes clutch engagement across wide operating temperatures.
Applications
Automatic transmissions, torque converters, and power steering systems requiring DEXRON® IV, DEXRON® III, MERCON®, or Allison C-4 standards. (Not for CVT or DCT).
| Parameter | Test Method | Units | Typical Value |
| Appearance / Color | Visual | — | Clear Red |
| Density @ 15°C | ASTM D4052 | g/cm³ | 0.855 |
| Kinematic Viscosity @ 40°C | ASTM D445 | mm²/s (cSt) | 34.7 |
| Kinematic Viscosity @ 100°C | ASTM D445 | mm²/s (cSt) | 7.1 |
| Viscosity Index (VI) | ASTM D2270 | — | 173 |
| Brookfield Viscosity @ -40°C | ASTM D2983 | mPa·s (cP) | 12,500 |
| Flash Point (COC) | ASTM D92 | °C | 212 |
| Pour Point | ASTM D97 | °C | -42 |
Available Packaging: 1L, 4L, 5L, 20L Pail, 208L Drum, 1000L IBC
3. ALVÖRA ATF Type IV
Slip-Controlled Lock-Up Automatic Transmission Fluid
Overview
ALVÖRA ATF Type IV is a friction-modified automatic transmission fluid specifically developed for electronically controlled automatic gearboxes with slip-controlled torque converter lock-up clutches.
Key Benefits
- Anti-Shudder Durability: Tailored frictional characteristics prevent lock-up clutch vibration and ensure quiet gear transitions.
- High Viscosity Index: Maintains stable film strength across extreme ambient and operating temperatures.
- Seal & Metal Compatibility: Protects elastomers and yellow metals against corrosion and hardening.
Applications
Multi-speed automatic transmissions specifying Type T-IV, Type T-III, or JWS 3309 fluid standards. (Not for CVT or DCT).
| Parameter | Test Method | Units | Typical Value |
| Appearance / Color | Visual | — | Clear Red |
| Density @ 15°C | ASTM D4052 | g/cm³ | 0.852 |
| Kinematic Viscosity @ 40°C | ASTM D445 | mm²/s (cSt) | 35.0 |
| Kinematic Viscosity @ 100°C | ASTM D445 | mm²/s (cSt) | 7.2 |
| Viscosity Index (VI) | ASTM D2270 | — | 175 |
| Brookfield Viscosity @ -40°C | ASTM D2983 | mPa·s (cP) | 14,000 |
| Flash Point (COC) | ASTM D92 | °C | 210 |
| Pour Point | ASTM D97 | °C | -48 |
Available Packaging: 1L, 4L, 5L, 20L Pail, 208L Drum, 1000L IBC
4. ALVÖRA ATF Dex III
All-Season Automatic Transmission & Power Steering Fluid
Overview
ALVÖRA ATF Dex III is an all-season automatic transmission fluid engineered with high-purity base stocks and shear-stable additives for smooth shifting and dependable wear protection in conventional automatic gearboxes.
Key Benefits
- Consistent Shift Quality: Controlled friction properties ensure crisp, smooth gear changes throughout fluid life.
- Fast Cold-Start Circulation: Low pour point ensures immediate hydraulic response in cold weather.
- Foam & Corrosion Resistance: Prevents aeration and protects internal components from rust and oxidation.
Applications
Passenger car and commercial automatic transmissions, power steering units, and hydraulic systems specifying DEXRON® III (H/G/F), MERCON®, or Allison C-4 standards. (Not for CVT or DCT).
| Parameter | Test Method | Units | Typical Value |
| Appearance / Color | Visual | — | Clear Red |
| Density @ 15°C | ASTM D4052 | g/cm³ | 0.860 |
| Kinematic Viscosity @ 40°C | ASTM D445 | mm²/s (cSt) | 36.5 |
| Kinematic Viscosity @ 100°C | ASTM D445 | mm²/s (cSt) | 7.4 |
| Viscosity Index (VI) | ASTM D2270 | — | 172 |
| Brookfield Viscosity @ -40°C | ASTM D2983 | mPa·s (cP) | 16,500 |
| Flash Point (COC) | ASTM D92 | °C | 206 |
| Pour Point | ASTM D97 | °C | -45 |
Available Packaging: 1L, 4L, 5L, 20L Pail, 208L Drum, 1000L IBC
5. ALVÖRA ATF Dex II
Mineral Automatic Transmission & Hydraulic Fluid
Overview
ALVÖRA ATF Dex II is a shear-stable mineral automatic transmission fluid formulated for older-generation automatic gearboxes, hydraulic clutches, and power-assisted steering systems.
Key Benefits
- Dependable Wear & Sludge Control: Protects gears and pumps against wear, deposits, and varnish buildup.
- Seal Conditioning: Maintains seal elasticity to prevent fluid leaks in high-mileage transmissions.
- Stable Hydraulic Performance: High resistance to foaming ensures smooth power transfer.
Applications
Automatic transmissions, torque converters, power steering systems, and industrial hydraulic units requiring DEXRON® IID / IIE or Allison C-3 / C-4 specifications. (Not for CVT or DCT).
| Parameter | Test Method | Units | Typical Value |
| Appearance / Color | Visual | — | Clear Red |
| Density @ 15°C | ASTM D4052 | g/cm³ | 0.868 |
| Kinematic Viscosity @ 40°C | ASTM D445 | mm²/s (cSt) | 38.5 |
| Kinematic Viscosity @ 100°C | ASTM D445 | mm²/s (cSt) | 7.5 |
| Viscosity Index (VI) | ASTM D2270 | — | 165 |
| Brookfield Viscosity @ -40°C | ASTM D2983 | mPa·s (cP) | 38,000 |
| Flash Point (COC) | ASTM D92 | °C | 202 |
| Pour Point | ASTM D97 | °C | -39 |
Available Packaging: 1L, 4L, 5L, 20L Pail, 208L Drum, 1000L IBC


