ALVÖRA Speciality Lubricants SAE 5W-20 API SN Premium Engine Oil

Executive Summary

ALVÖRA SAE 5W-20 API SN Premium is an advanced, high-performance engine oil engineered with modern German additive technology to deliver exceptional thermal stability, wear protection, and optimized fuel economy. Specially formulated for modern gasoline engines, ALVÖRA 5W-20 ensures rapid oil flow during cold starts while maintaining a robust protective film at high operating temperatures.

Key Features & Benefits

  • Enhanced Fuel Efficiency: Low-viscosity formulation reduces internal engine friction, contributing to improved fuel economy and lowered carbon emissions.

  • Superior Cold-Start Protection: Outstanding low-temperature fluidity ensures instant lubrication across engine components upon ignition, minimizing start-up wear.

  • Thermal & Oxidation Stability: High-grade base oils combined with advanced anti-oxidant packages resist oil breakdown, sludge formation, and deposit build-up under high heat.

  • Complete Engine Cleanliness: Active detergent and dispersant additives keep pistons, valves, and oil galleries clean over extended drain intervals.

  • API SN Compliance: Formulated to meet and exceed API SN standards, offering advanced protection against Low-Speed Pre-Ignition (LSPI) and timing chain wear in modern turbocharged direct-injection (TGDI) engines.

Product Applications

ALVÖRA SAE 5W-20 API SN Premium is suitable for:

  • Naturally aspirated, turbocharged, and direct-injection passenger car gasoline engines requiring an SAE 5W-20 viscosity grade.

  • Modern hybrid vehicles requiring low-viscosity engine oils for frequent stop-start cycles.

  • Light-duty commercial vehicles and SUVs specifying API SN performance levels.

Product Data Sheet (PDS)

Technical Specifications & Typical Properties

Property Test Method Typical Value Unit
SAE Viscosity Grade SAE J300 5W-20 —
API Performance Category API SN —
Appearance Visual Clear & Bright —
Density @ 15°C ASTM D4052 0.852
Kinematic Viscosity @ 40°C ASTM D445 48.5
Kinematic Viscosity @ 100°C ASTM D445 8.6
Viscosity Index (VI) ASTM D2270 156 —
Flash Point (COC) ASTM D92 224 °C
Pour Point ASTM D97 -42 °C
Total Base Number (TBN) ASTM D2896 7.8

Performance Standards & Recommendations

  • API: SN / SM / SL

  • ILSAC: GF-5

  • Formulated with German Technology Standard

Storage & Handling

Store under cover in clean, dry conditions away from direct sunlight, severe cold, and extreme heat. Ideal storage temperature is between 0°C and 40°C. Keep containers tightly closed when not in use.

Health & Safety

Based on available toxicological information, ALVÖRA SAE 5W-20 API SN Premium produces no adverse health effects when used correctly for its intended application and when proper personal hygiene standards are maintained. Avoid prolonged skin contact. Dispose of used oil and empty packaging responsibly in accordance with local environmental regulations.

ALVÖRA Speciality Lubricants SAE 10W-40 API SN Premium Mineral Engine Oil

Executive Summary

ALVÖRA SAE 10W-40 API SN Premium Mineral is a high-performance engine oil formulated with advanced German additive technology designed to provide robust engine protection, dependable thermal stability, and smooth operation under varied driving conditions. Engineered for modern and classic passenger car engines, it offers reliable wear resistance and cleanliness across extended operating cycles.

Key Features & Benefits

  • Reliable Wear Protection: Advanced anti-wear additive technology forms a durable protective film on high-stress engine components, minimizing friction and mechanical wear.

  • Thermal & Oxidation Stability: High-quality mineral base oils resist oil thickening and thermal breakdown, preventing harmful sludge and varnish deposits under high temperatures.

  • All-Season Performance: Provides excellent fluidity at lower temperatures during start-up while maintaining strong viscosity protection in hot operating environments.

  • Engine Cleanliness: Powerful detergent and dispersant properties keep internal parts clean, ensuring optimal piston ring freedom and smooth valve train operation.

  • API SN Compliance: Engineered to meet rigorous API SN standards, offering improved deposit control and seal compatibility.

Product Applications

ALVÖRA SAE 10W-40 API SN Premium Mineral is ideal for:

  • Naturally aspirated and turbocharged gasoline and light-duty diesel passenger car engines specifying SAE 10W-40.

  • High-mileage modern and traditional vehicles requiring dependable viscosity retention and oil consumption control.

  • Fleet operations and passenger cars operating under mixed urban and highway driving conditions.

Product Data Sheet (PDS)

Technical Specifications & Typical Properties

Property Test Method Typical Value Unit
SAE Viscosity Grade SAE J300 10W-40 —
API Performance Category API SN —
Base Oil Type — Premium Mineral —
Density @ 15°C ASTM D4052 0.868 $\text{g/cm}^3$
Kinematic Viscosity @ 40°C ASTM D445 98.2 $\text{mm}^2/\text{s}$ (cSt)
Kinematic Viscosity @ 100°C ASTM D445 14.6 $\text{mm}^2/\text{s}$ (cSt)
Viscosity Index (VI) ASTM D2270 154 —
Flash Point (COC) ASTM D92 230 °C
Pour Point ASTM D97 -36 °C
Total Base Number (TBN) ASTM D2896 8.2 $\text{mg KOH/g}$

Performance Standards & Recommendations

  • API: SN / SM / SL / CF

  • Formulated with German Technology Standard

Storage & Handling

Store under cover in clean, dry conditions away from direct sunlight, extreme heat, and severe frost. Ideal storage temperatures are between 0°C and 40°C. Keep containers tightly sealed when not in use to prevent contamination.

Health & Safety

Based on available toxicological data, this product is not expected to produce adverse health effects when used for its intended applications. Avoid prolonged or repeated skin contact. Wash thoroughly after handling. Dispose of used oil and packaging in accordance with local environmental regulations.

ALVÖRA Speciality Lubricants SAE 5W-30 API SN Premium Engine Oil

Executive Summary

ALVÖRA SAE 5W-30 API SN Premium is a top-tier, high-performance engine oil formulated with advanced German additive technology to meet the demanding requirements of modern passenger vehicles. Engineered to provide exceptional fuel economy, superior engine cleanliness, and maximum thermal protection, ALVÖRA 5W-30 ensures rapid lubrication during cold start-ups while maintaining strong viscosity retention under high stress and elevated operating temperatures.

Key Features & Benefits

  • Fuel Economy & Efficiency: Low-viscosity multi-grade profile minimizes internal fluid drag, delivering measurable improvements in fuel efficiency and reduced exhaust emissions.

  • Rapid Cold-Start Protection: Excellent low-temperature fluidity guarantees immediate oil circulation across critical engine parts during cold ignition, significantly reducing initial wear.

  • Thermal & Oxidation Resistance: Fortified with premium synthetic/hydrocracked base stocks and anti-oxidant packages to resist thermal breakdown, sludge accumulation, and varnish formation.

  • Advanced Engine Cleanliness: Active detergent agents neutralize combustion acids and keep pistons, valves, and turbocharger bearings free of harmful carbon deposits.

  • API SN Certified Performance: Engineered to protect against Low-Speed Pre-Ignition (LSPI) and timing chain wear in modern Gasoline Direct Injection (GDI) and Turbocharged GDI (TGDI) engines.

Product Applications

ALVÖRA SAE 5W-30 API SN Premium is optimized for:

  • Modern passenger cars, light commercial vehicles, and SUVs calling for an SAE 5W-30 viscosity grade.

  • Gasoline engines, including naturally aspirated, turbocharged, supercharged, and direct-injection (GDI/TGDI) systems.

  • Modern hybrid and stop-start vehicles requiring fast oil pressure development across constant ignition cycles.

Product Data Sheet (PDS)

Technical Specifications & Typical Properties

Property Test Method Typical Value Unit
SAE Viscosity Grade SAE J300 5W-30 —
API Performance Category API SN —
Packaging Size — 5 Liters —
Appearance Visual Clear & Amber —
Density @ 15°C ASTM D4052 0.855
Kinematic Viscosity @ 40°C ASTM D445
Kinematic Viscosity @ 100°C ASTM D445 10.4
Viscosity Index (VI) ASTM D2270 160 —
Flash Point (COC) ASTM D92 228 °C
Pour Point ASTM D97 -39 °C
Total Base Number (TBN) ASTM D2896 7.9

Performance Standards & Recommendations

  • API: SN / SM / SL

  • ILSAC: GF-5

  • Formulated with German Technology Standard

Storage & Handling

Store under cover in dry, cool conditions away from direct sunlight, severe frost, and heat sources. Ideal storage temperatures range between 0°C and 40°C. Keep containers tightly closed when not in use to maintain product purity.

Health & Safety

When used in accordance with standard industrial hygiene practices and for its intended purpose, ALVÖRA SAE 5W-20 API SN Premium is safe to use and presents no health risks. Avoid continuous or repeated skin exposure with used motor oil. Dispose of spent oil and containers strictly according to regional environmental regulations.

Aliquet et iaculis et viverra vitae ligula

ALVÖRA Speciality Lubricants Brake Fluid DOT-4

Executive Summary

ALVÖRA Brake Fluid DOT-4 is an advanced, high-performance synthetic hydraulic brake fluid engineered for high-demand modern braking systems. Formulated with German technology standards, it delivers superior thermal stability, elevated boiling points, and rapid hydraulic pressure response. Designed to meet strict safety and protection specifications, ALVÖRA DOT-4 ensures maximum braking performance and seal longevity under severe driving conditions.

Key Features & Benefits

  • Elevated Boiling Points: Higher dry and wet boiling points significantly reduce the risk of vapor lock under continuous or heavy braking cycles.

  • System Protection & Safety: Advanced anti-corrosion additives protect copper, brass, steel, and aluminum components against oxidation and pitting.

  • Optimal Viscosity Control: Maintains fast pressure transfer across extreme temperature spectrums, supporting modern electronic safety systems like ABS, ESP, and TCS.

  • Elastomer Preservation: Compatible with all standard rubber seals and hoses, preventing leakage, seal hardening, and degradation.

  • Thermal Endurance: Resists thermal breakdown and oxidation under high operating temperatures, extending fluid service life.

Product Applications

ALVÖRA Brake Fluid DOT-4 is suitable for:

  • Modern passenger cars, SUVs, light commercial vehicles, and heavy-duty vehicles calling for DOT-4 performance specifications.

  • Vehicles equipped with Anti-Lock Braking Systems (ABS), Electronic Stability Programs (ESP), and Traction Control Systems (TCS).

  • Hydraulic clutch systems requiring a DOT-4 or DOT-3 synthetic brake fluid.

Compatibility Note: Fully compatible with conventional DOT-3 and DOT-4 hydraulic brake fluids. Do not mix with mineral oils (LHM) or silicone-based fluids (DOT-5).

Product Data Sheet (PDS)

Technical Specifications & Typical Properties

Property Test Method Typical Value Unit
DOT Specification FMVSS No. 116 DOT-4

—

Fluid Type — Quick Synthetic Heavy Duty

—

Packaging Size — 500 GW (g)

—

Appearance Visual Clear / Amber

—

Dry Boiling Point ASTM D1120 $\ge 245$

°C

Wet Boiling Point ASTM D1120 $\ge 155$

°C

Kinematic Viscosity @ -40°C ASTM D445 $\le 1500$

 

Kinematic Viscosity @ 100°C ASTM D445 $\ge 1.8$

 

pH Value ASTM D1287 7.5 – 10.0

—

Density @ 20°C ASTM D4052 1.040 – 1.070

 

Performance Standards & Specifications

  • FMVSS: No. 116 DOT-4

  • SAE: J1704

  • ISO: 4925 Class 4

  • Formulated with German Technology Standard

Storage & Handling

Store under cover in clean, dry conditions away from direct sunlight and heat sources. Brake fluid rapidly absorbs atmospheric moisture; always keep containers tightly sealed when not in use. Wipe up any spilled fluid on vehicle painted surfaces immediately with clean water.

Health & Safety

Avoid direct contact with skin and eyes. Wash thoroughly with soap and water after handling. Spent brake fluid should be collected and disposed of in compliance with local environmental regulations

ALVÖRA Speciality Lubricants SAE 10W-30 API SN Premium Engine Oil

Executive Summary

ALVÖRA SAE 10W-30 API SN Premium is a high-performance engine oil formulated with advanced German additive technology to deliver optimized lubrication, thermal stability, and engine protection. Specially designed for modern gasoline passenger cars and light commercial vehicles, ALVÖRA 10W-30 balances low-temperature cold-start fluidity with high-temperature shear resistance to prolong engine life and maximize fuel efficiency.

Key Features & Benefits

  • Enhanced Fuel Economy: Optimized multi-grade viscosity profile reduces internal engine friction, contributing to improved fuel efficiency.

  • Dependable Cold-Start Protection: Excellent fluidity at low temperatures ensures fast oil pressure buildup and immediate lubrication during cold starts, reducing component wear.

  • Oxidation & Thermal Control: Formulated with high-grade base stocks and advanced anti-oxidant packages to resist oil degradation, sludge buildup, and deposit formation under continuous high-heat operations.

  • Superior Engine Cleanliness: Active dispersants and detergents prevent carbon and varnish accumulation on pistons, valves, and oil channels.

  • API SN Compliance: Engineered to meet API SN requirements, protecting modern engines against timing chain wear and Low-Speed Pre-Ignition (LSPI).

Product Applications

ALVÖRA SAE 10W-30 API SN Premium is suitable for:

  • Passenger cars, light commercial vehicles, and SUVs specifying SAE 10W-30 viscosity grade engine oil.

  • Naturally aspirated, turbocharged, and direct-injection gasoline engines requiring API SN performance standards.

  • Vehicles operating under variable driving conditions, including stop-and-go urban commuting and highway driving.

Product Data Sheet (PDS)

Technical Specifications & Typical Properties

Property Test Method Typical Value Unit
SAE Viscosity Grade SAE J300 10W-30

—

API Performance Category API SN

—

Packaging Size — 5 Liters

—

Appearance Visual Clear & Bright

—

Density @ 15°C ASTM D4052 0.862

Kinematic Viscosity @ 40°C ASTM D445 68.4

Kinematic Viscosity @ 100°C ASTM D445 10.6

Viscosity Index (VI) ASTM D2270 145

—

Flash Point (COC) ASTM D92 226

°C

Pour Point ASTM D97 -36

°C

Total Base Number (TBN) ASTM D2896 7.8

Performance Standards & Recommendations

  • API: SN / SM / SL

  • ILSAC: GF-5

  • Formulated with German Technology Standard

Storage & Handling

Store under cover in clean, dry conditions away from direct sunlight, extreme heat, and severe frost. Ideal storage temperatures range between 0°C and 40°C. Keep containers tightly closed when not in use to avoid moisture and particulate contamination.

Health & Safety

ALVÖRA SAE 10W-30 API SN Premium is safe to use when handled in accordance with standard industrial hygiene practices. Avoid prolonged or repeated skin contact with used engine oil. Dispose of used oil and packaging responsibly according to local environmental rules.

ALVÖRA Speciality Lubricants SAE 20W-50 API SL/CF Premium Mineral Engine Oil

Executive Summary

ALVÖRA SAE 20W-50 API SL/CF Premium Mineral is a heavy-duty multi-grade engine oil engineered with advanced German additive technology to provide robust protection for gasoline and diesel engines operating under high temperatures and severe loading conditions. Formulated with high-viscosity index mineral base oils, ALVÖRA 20W-50 delivers exceptional shear stability, oil film strength, and engine wear protection for high-mileage passenger cars, commercial fleets, and heavy-duty vehicles.

Key Features & Benefits

  • High-Temperature Protection: Maintains a heavy-duty protective oil film even in extreme ambient heat and under high engine loads, preventing metal-to-metal contact.

  • Sludge & Deposit Control: Advanced detergent and dispersant additive packages minimize sludge formation, carbon build-up, and lacquer on critical engine components.

  • Reduced Oil Consumption: High-viscosity formula seals gaps in wearing internal components, significantly reducing oil volatility, blow-by, and oil burn-off in older engines.

  • Corrosion & Rust Shielding: Neutralizes corrosive acid by-products of combustion, shielding bearings, pistons, and valve trains from rust and chemical wear.

  • Dual-Specification Performance: Meets API SL/CF specifications, making it versatile for mixed fleet applications running gasoline or light diesel engines.

Product Applications

ALVÖRA SAE 20W-50 API SL/CF Premium Mineral is recommended for:

  • Naturally aspirated, turbocharged, and multi-valve gasoline engines requiring SAE 20W-50 viscosity grade and API SL performance.

  • Light diesel engines and commercial vehicles requiring API CF performance.

  • High-mileage passenger vehicles operating in hot climates or under prolonged heavy-duty driving conditions.

Product Data Sheet (PDS)

Technical Specifications & Typical Properties

Property Test Method Typical Value Unit
SAE Viscosity Grade SAE J300 20W-50

—

API Performance Category API SL / CF

—

Base Oil Type — Premium Mineral

—

Packaging Size — 1,4,5,20 & 208L

—

Appearance Visual Clear & Bright —
Density @ 15°C ASTM D4052 0.885
Kinematic Viscosity @ 40°C ASTM D445 165.2
Kinematic Viscosity @ 100°C ASTM D445 18.5
Viscosity Index (VI) ASTM D2270 125 —
Flash Point (COC) ASTM D92 240 °C
Pour Point ASTM D97 -24 °C
Total Base Number (TBN) ASTM D2896 8.5

Performance Standards & Recommendations

  • API: SL / SJ / CF

  • Formulated with German Technology Standard

Storage & Handling

Store under cover in clean, dry conditions away from direct sunlight, severe frost, and heat sources. Ideal storage temperatures range between 0°C and 40°C. Keep packaging tightly sealed when not in use to avoid moisture or dust contamination.

Health & Safety

ALVÖRA SAE 20W-50 API SL/CF Premium Mineral presents no significant health or safety hazards when used properly for its intended application and according to standard industrial hygiene practices. Avoid prolonged contact with skin. Collect used oil responsibly and dispose of it at authorized recycling facilities in accordance with local environmental regulations.

ALVÖRA Speciality Lubricants SAE 20W-40 API SL/CF Premium Mineral Engine Oil

Executive Summary

ALVÖRA SAE 20W-40 API SL/CF Premium Mineral is a heavy-duty multi-grade engine oil engineered with advanced German additive technology to deliver exceptional wear protection and thermal stability under demanding operating conditions. Specially formulated with high-quality mineral base stocks, ALVÖRA 20W-40 ensures dependable lubrication film strength, protecting critical engine parts against high-heat stress, sludge accumulation, and mechanical wear in passenger vehicles, light commercial trucks, and mixed fleets.

Key Features & Benefits

  • Robust Thermal & Shear Stability: Maintains a durable, high-viscosity protective film under intense heat and heavy load conditions, preventing metal-to-metal contact.

  • Enhanced Deposit & Sludge Control: Advanced detergent and dispersant additive technology neutralizes combustion by-products to prevent carbon build-up and piston varnish.

  • Seal & Engine Protection: Helps seal internal clearances in modern and older high-mileage engines, reducing oil consumption and blow-by emissions.

  • Corrosion & Wear Shielding: Formulated with active anti-wear agents to extend the operational life of bearings, camshafts, and valve train components.

  • Dual API Specification: Certified to meet API SL/CF performance standards, offering multi-fuel flexibility across both gasoline and light-duty diesel engines.

Product Applications

ALVÖRA SAE 20W-40 API SL/CF Premium Mineral is suitable for:

  • Naturally aspirated, multi-valve, and turbocharged gasoline engines requiring SAE 20W-40 viscosity grade and API SL performance level.

  • Light-duty diesel engines requiring API CF performance standards.

  • High-mileage passenger cars, SUVs, commercial fleets, and light trucks operating under hot climate conditions or heavy payload demands.

Product Data Sheet (PDS)

Technical Specifications & Typical Properties

Property Test Method Typical Value Unit
SAE Viscosity Grade SAE J300 20W-40

—

API Performance Category API SL / CF

—

Base Oil Type — Premium Mineral

—

Packaging Size — 1,4,5,20& 208 Liters

—

Appearance Visual Clear & Bright —
Density @ 15°C ASTM D4052 0.880
Kinematic Viscosity @ 40°C ASTM D445 128.5
Kinematic Viscosity @ 100°C ASTM D445 14.8
Viscosity Index (VI) ASTM D2270 118 —
Flash Point (COC) ASTM D92 236 °C
Pour Point ASTM D97 -27 °C
Total Base Number (TBN) ASTM D2896 8.2

Performance Standards & Recommendations

  • API: SL / SJ / CF

  • Formulated with German Technology Standard

Storage & Handling

Store under cover in clean, dry conditions away from direct sunlight, extreme heat, and severe frost. Ideal storage temperatures range between 0°C and 40°C. Keep packaging tightly sealed when not in use to avoid moisture or dust contamination.

Health & Safety

ALVÖRA SAE 20W-40 API SL/CF Premium Mineral presents no significant health or safety hazards when used properly for its intended application and according to standard industrial hygiene practices. Avoid prolonged contact with skin. Collect used oil responsibly and dispose of it at authorized recycling facilities in accordance with local environmental regulations.

Powered by Joinchat