Aliquet et iaculis et viverra vitae ligula

ALVÖRA Speciality Lubricants Brake Fluid DOT-4

Executive Summary

ALVÖRA Brake Fluid DOT-4 is an advanced, high-performance synthetic hydraulic brake fluid engineered for high-demand modern braking systems. Formulated with German technology standards, it delivers superior thermal stability, elevated boiling points, and rapid hydraulic pressure response. Designed to meet strict safety and protection specifications, ALVÖRA DOT-4 ensures maximum braking performance and seal longevity under severe driving conditions.

Key Features & Benefits

  • Elevated Boiling Points: Higher dry and wet boiling points significantly reduce the risk of vapor lock under continuous or heavy braking cycles.

  • System Protection & Safety: Advanced anti-corrosion additives protect copper, brass, steel, and aluminum components against oxidation and pitting.

  • Optimal Viscosity Control: Maintains fast pressure transfer across extreme temperature spectrums, supporting modern electronic safety systems like ABS, ESP, and TCS.

  • Elastomer Preservation: Compatible with all standard rubber seals and hoses, preventing leakage, seal hardening, and degradation.

  • Thermal Endurance: Resists thermal breakdown and oxidation under high operating temperatures, extending fluid service life.

Product Applications

ALVÖRA Brake Fluid DOT-4 is suitable for:

  • Modern passenger cars, SUVs, light commercial vehicles, and heavy-duty vehicles calling for DOT-4 performance specifications.

  • Vehicles equipped with Anti-Lock Braking Systems (ABS), Electronic Stability Programs (ESP), and Traction Control Systems (TCS).

  • Hydraulic clutch systems requiring a DOT-4 or DOT-3 synthetic brake fluid.

Compatibility Note: Fully compatible with conventional DOT-3 and DOT-4 hydraulic brake fluids. Do not mix with mineral oils (LHM) or silicone-based fluids (DOT-5).

Product Data Sheet (PDS)

Technical Specifications & Typical Properties

Property Test Method Typical Value Unit
DOT Specification FMVSS No. 116 DOT-4

—

Fluid Type — Quick Synthetic Heavy Duty

—

Packaging Size — 500 GW (g)

—

Appearance Visual Clear / Amber

—

Dry Boiling Point ASTM D1120 $\ge 245$

°C

Wet Boiling Point ASTM D1120 $\ge 155$

°C

Kinematic Viscosity @ -40°C ASTM D445 $\le 1500$

 

Kinematic Viscosity @ 100°C ASTM D445 $\ge 1.8$

 

pH Value ASTM D1287 7.5 – 10.0

—

Density @ 20°C ASTM D4052 1.040 – 1.070

 

Performance Standards & Specifications

  • FMVSS: No. 116 DOT-4

  • SAE: J1704

  • ISO: 4925 Class 4

  • Formulated with German Technology Standard

Storage & Handling

Store under cover in clean, dry conditions away from direct sunlight and heat sources. Brake fluid rapidly absorbs atmospheric moisture; always keep containers tightly sealed when not in use. Wipe up any spilled fluid on vehicle painted surfaces immediately with clean water.

Health & Safety

Avoid direct contact with skin and eyes. Wash thoroughly with soap and water after handling. Spent brake fluid should be collected and disposed of in compliance with local environmental regulations

Leave a Reply

Your email address will not be published. Required fields are marked *

Powered by Joinchat